Digital Security Controls PC1575 Instruction Manual Page 13
- Page / 19
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
12
To set the system time, enter [
✱] [6] followed by the Master Code. Press [1]. The keypad will now
accept 10 consecutive digits:
• Enter the Time in Hours and Minutes using the 24 Hour format (00:00 to 23:59).
• Enter the Date in Months, Days and Years (MM DD YY).
Language Selection (LCD Keypads Only)
The displayed language of the keypad can be changed by pressing and holding both of the [< >]
keys simultaneously. This will cause the keypad to enter the Language Selection mode. Scroll to the
desired language and press the [
✱] key. This will select the new language and restart the keypad.
Testing Your System
Alarm Test
The Alarm Test provides two second test of the keypad sounder and bell or siren. Begin with the panel
in the Ready state.
From an LED keypad, Enter [
✱][6][Master Code][4] then press [#] to return to the Ready state.
From an LCD keypad, press [✱] to enter the functions list. Use the arrow (< >) keys to scroll to find
“User Functions” and press [✱] to select. Enter your Master Code and scroll to find the following
message...
Press [
✱] to perform an Alarm Test. The keypad will display the following message...
Press [#] to return to the Ready state.
Full System Test
We recommend that you test your system weekly. Should the system fail to function properly, call your
installation company immediately for service.
NOTE: Perform system tests during off-peak hours, such as early morning or late evening.
1. Inform the monitoring station that you are testing your system.
2. Begin with the system in the Ready state.
3. Perform a walk test.
From an LED keypad, enter [
✱][6][Master Code][0]. The keypad will sound three times when the
feature is enabled.
From an LCD keypad, press [
✱] to enter the functions list. Use the arrow (< >) keys to scroll to find
“User Functions” and press [
✱] to select. Enter your Master Code and scroll to find the following
message.
Press [
✱] to select. The keypad will beep three times and the display will read...
4. Activate each sensor in turn (e.g. open a door/window or walk in motion detector areas).
Select Option <>
Walk Test
Walk Test
is enabled
Select Option <>
System Test
System Test
In Progress
- Instruction 1
- About Your Security System 3
- General System Operation 3
- System Information 4
- Access Codes 5
- Arming the System 5
- Alternate Arming Methods 6
- Disarming the System 7
- If An Alarm Sounds 8
- Function Keys 8
- Programming Security Codes 8
- Enter Code 10
- To Arm System 10
- Zone Bypassing 11
- Viewing Trouble Conditions 12
- Testing Your System 13
- Door Chime Feature 14
- Fire Alarm Operation 14
- Fire Escape Planning 15
- Household Fire Safety Audit 15
- Maintenance 16
- Limited Warranty 17
- FCC COMPLIANCE STATEMENT 18
- IMPORTANT INFORMATION 18
Related products and manuals for Security access control systems Digital Security Controls PC1575
(16 pages)
(53 pages)Code 3 RockerPak 415 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Sprzęt komputerowy Code 3 RockerPak 415.
Dostarczamy 1 pdf podręczników Code 3 RockerPak 415 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Comments to this Manuals